The top picture is how the day started out, and the bottom was how it ended, so there is progress. I think the calibration was wrong for the first print (the blue and white fellow in the back). I reset everything and then decided to print these two little Benchy Boats. On the first try, the white one was going fine, but the blue one...not so much. I just happened to look at the back of the machine and noticed that the blue spool of filament was all twisted up. (I forgot to take a picture!) I fixed it, and the boats printed really well. But now, I'm not sure whether the problem was the calibration or the spool, darn it. I'll try the little head again next. If that works, I'll move on to printing Roxy's fingers :)
No comments:
Post a Comment